Elinstechnology · Newsroom

What exactly is 5G - E-Lins Technology
The “G” in 5G stands for “generation.” Wireless phone technology technically started with 1G, and in the early 1990s,

October 23, 2021

Basic introduction to routing
Routing refers to the process of determining the network scope of the end-to-end path when a packet travels from the source to the destination.

October 22, 2021

What are the benefits of 5G Network?
We all know that 5G already comes into our life and it will play a more and more important role in future; it surely greatly affects IoT and makes our life better.

September 24, 2021

The main function of the router
A router is a device that connects to various local area networks and wide area networks in the Internet.

September 23, 2021

What exactly is 5G? - E-Lins Technology
We heard “5G” more and more often now and then what exactly is 5G?

August 24, 2021

Technology and capabilities of wireless industrial routers | E-lins
A wireless industrial router is a device used to connect two or more networks, and can transmit signals to only the required ports.

August 24, 2021

Elevator remote monitoring system based on 5G router
The 5G industrial router launched at present can well meet the networking requirements under a variety of scenarios, such as the application in the elevator remote monitoring management system.

July 22, 2021

Basic Introduction of Data Transfer Unit
The most basic usage of DTU is: put a SIM card with GPRS enabled in DTU, register to GPRS network after DTU is powered on, and then establish a connection with the data processing center through the GPRS network, as shown on the right.

July 22, 2021

Modbus 4g industrial router for industrial application
Modbus is a serial communication protocol. E-Lins 4g lte cellular routers are equipped with serial ports and support RS232 or RS485, which can support Modbus.

June 25, 2021

Basic introduction to 4g wireless router
A wireless router is like an extended product that combines a simple wireless AP and a broadband router into one.

June 25, 2021

5G cellular router - E-Lins Technology Co. Ltd.
5G is becoming more and more popular M2M and IoT cases and projects. And this trend will become more and more strong in the future.

May 20, 2021

4g lte cellular router apply for travel security monitoring
These days, 4g lte cellular router load balancing helps a lot for security monitoring, E-Lins routers also can support monitoring.

May 20, 2021

The difference between 4g router and 4g DTU
Data exchange using 4G routers uses a secure tunnel established between the wireless router and the communication server.

May 20, 2021

Is there an industrial router built-in eSIM?
At first we need make clear what the eSIM it is. Embedded SIM (eSIM) is just a physical SIM gone digital.

April 24, 2021

Two charging pile solutions based on 4g router
First, Centralized charging pile: this type of charging pile system can use wired LAN connection,

April 23, 2021

Data exchange mode of the switch
The straight-through Ethernet switch can be understood as a line matrix telephone switch that crosses vertically and horizontally between each port.

April 23, 2021

Which 5G Chipset does E-Lins router built-in?
We know now some models of E-Lins routers could support 5G network. Do you know which 5G Chipset E-Lins router built-in? The answer is Quectel RM500Q 5G Chipset, which based on Qualcomm 5G Platform.

March 24, 2021

On-line detection of Industrial 4G router
In some bad environment, it is easy to have the network connection disconnection connection connection. The industrial 4G router’s on line probe regularly checks the network connection status,

February 24, 2021

How the industrial 4g wireless router works
The role of the router: 1. Heterogeneous network interconnection: such as network interconnection with different seed network protocols

January 25, 2021

E-Lins 4g industrial router & 4g DTU
4G industrial router and 4G DTU both realize the wireless network data transmission function, and the differences between them are mainly from the use method,

December 23, 2020

The difference between 4g router’s Resetting and Rebooting
Reboot your router and modem if you suspect your network isn't working as it should.

November 24, 2020

4g industrial sim router with SNMP
SNMP is specifically designed for use in IP network management network nodes (servers, workstations, routers, switches, and HUBS, etc.)

November 24, 2020

What is 4G LTE Industrial Router?
What is 4G LTE Industrial Router? 4G router broadband technology means you will enjoy 5X faster downloads and uploads than 3G router.

November 24, 2020

What is 5G Technology? E-Lins Technology
The “5G” stands for “fifth generation” cellular communication. 5G is able to operate in the millimeter wave,

October 23, 2020

Application of 4g router in monitoring field
E-Lins 4g router supports intelligent switching backup function of wireless public network and wired WAN double link;

October 22, 2020

Application of 4G industrial router in security monitoring
4g router with ethernet was designed with a watchdog to ensure the stability of the system and a complete anti-dropping mechanism to ensure that the data terminal was online.

October 22, 2020

What is the 5G Network Speed?
5G is the fastest mobile network technology available and at the time of writing real-world download speeds are averaging around 130-250Mbps,

September 25, 2020

Industrial router’s function and the way it works
A router is the first line of security from intrusion into a network. Enabling the highest level of security on the router turns on things like the firewall

September 25, 2020

The benefits of 4G industrial grade router (DTU)
E-Lins’ dual sim industrial grade router DTU can ensure the double mode or the different operators are online at the same time,

August 27, 2020

Industrial 4g Sim Card Routers With Wifi Function
Industrial 4G routers are compact, ruggedized designed for mission-critical connectivity in the most challenging environments.

August 27, 2020

E-Lins 4g router with MIMO function
The E-Lins H685 series 4g router with external antennas is a compact, ruggedized 3G/4G/LTE cellular networking solution designed for mission-critical connectivity in the most challenging environments.

July 27, 2020

What is 5G? - E-Lins Technology
The “5G” stands for “fifth generation” cellular communication. 5G is able to operate in the millimeter wave (a super high frequency spectrum that ranges from 24 to 100 GHz),

July 4, 2020

The advantages for the 4g router with external antenna
To change your life and overall work performance switch to high-speed wireless connectivity with the 4G Router that gives powers you with lightning fast internet access with a top notch speed.

July 4, 2020

Welcome to 5G Times - E-Lins Technology
5G Times is coming, maybe we can enjoy 5G in our daily life in the end of 2019 or in 2020.

May 28, 2020

What is a WiFi router?
Like a wired router, a wireless router is a device that is used to provide access to the Internet or a private network.

May 28, 2020

What is captive portal?
More and more often we hear the captive portal of a router. Then we have a question: what is captive portal?

April 27, 2020

The advantages for the 4g router with external antenna
To change your life and overall work performance switch to high-speed wireless connectivity with the 4G Router that gives powers you with lightning fast internet access with a top notch speed.

April 27, 2020

What exactly is 5G? E-Lins Technology
We hear 5G more and more often now, so what exactly is 5G? The “G” in 5G stands for “generation.” Wireless phone technology technically started with 1G, and in the early 1990s,

March 25, 2020

LTE Industrial Grade Sim Card Router With PoE
Power Over Ethernet refers to the technology that provides dc Power to some ip-based terminals (such as IP telephones, wireless LAN access points AP, webcams, etc.)

March 25, 2020

Application of Wireless 4g Sim Router in Self-Service System
4G industrial-grade wireless router refers to an industrial-grade outdoor high-speed wireless Internet terminal that utilizes 4G LTE network to achieve long-distance wireless transmission of data.

February 26, 2020

4G Router TCP/IP Network Description
The most widely used communications protocol. TCP/IP prepares and forwards data packets over a network such as Ethernet.

February 25, 2020

5G is here, but do you know how fast 5G is?
In the past 40 years, China's communications industry has experienced 1G blanks, 2G following, 3G breakthroughs and 4G simultaneous exploration.

January 24, 2020

Multiple-Input Multiple-Output (MIMO) Wireless Technology
Multiple-Input Multiple-Output (MIMO) is a wireless technology that uses multiple transmitters and receivers to transfer more data at the same time.

December 23, 2019

Captive Portal by E-Lins Technology
A captive portal is a web page accessed with a web browser that is displayed to newly connected users of a Wi-Fi network before they are granted broader access to network resources.

December 23, 2019

4G module apply to SIM based router
4G module is a general term for a product in which the hardware is loaded into the specified frequency band, the software supports the standard LTE protocol,

November 26, 2019

The advantages of 5Ghz Wi-Fi
5G Wi-Fi is short for fifth-generation Wi-Fi technology. Wi-Fi technology was born in 1997 and has now reached its fifth generation.

November 26, 2019

File Transfer Protocol
The File Transfer Protocol (FTP) is a standard network protocol used for the transfer of computer files from a server to a client using the Client–server model on a computer network.

November 26, 2019

Transparent Transmission Benefits and Security Factors of 4G Industrial Routers
Transmission, popular said is "transparent transmission." The data needs to be sent to the destination node without any processing of the data on the premise of ensuring quality.

October 23, 2019

DTU work process – E-Lins Technology
After the 4G DTU is powered on, first read the working parameters saved in the internal FLASH, and then perform 4G PHCP dialing.

September 24, 2019

The difference between 2.4g and 5G frequency bands
2.4g and 5G are different protocols used in wireless networks. 2.4g refers to 2.412mhz-2.472mhz in China and can be divided into 13 full channels,

September 24, 2019

 59 12